Expansion room application

The welding of large and special-shaped structural parts needs to be flipped by crane, and the smoke collection is difficult. A single dust collector collector cover collects smoke at a fixed point, but the moving range is small and the purification effect is general. Therefore, we have developed a retractable welding room with welding smoke purification function.

The dust in the telescopic room can be collected in multiple directions, the space size can be adjusted at will, and the telescopic movement can be freely moved, and the light and dust and noise reduction can be effectively solved.

Advantages of expansion welding dust removal room

1. Simple production, low cost, short cycle;

2. Retractable, the use of space can be reduced or expanded according to need, no impact on the use of the top driving;

3. 90% of the space of the welding station is closed and the dust is not easy to overflow, and the dust collection effect is good;

4. Lighting is not affected, so welding efficiency and quality are not affected;

5. Easy to operate.

The operation method of the expansion welding dust removal room is as follows:

1. Place the workpiece to be welded in the welding area;

Second, the operator through the remote control to control the dust removal room to move to the corresponding position;

3. Start the dust removal host;

4. Start welding parts;

Fifth, after the welding is completed, turn off the dust removal host;

Six, through the remote control to control the dust removal room move to the next position